Hot Rolled Bright Surface 201 304 310 316 321 2mm 3mm 6mm Metal Rod
Stainless Steel Round Bar
Stainless Steel Round Bar
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and
the copper
content is lower than J4. Its processing performance is less
thanJ4. It is suitable for ordinary shallow drawing and deep
drawing products, such as decorative board, sanitary products,
sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and
the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface
is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the
bending problem, the bend is easy to break, and the groove is easy
to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing
can be done on the decorative panel, but it is not possible with a
little difficulty. There is feedback that the shearing plate is
bent, and there is an inner seam after breaking (black
titanium,color plate series, sanding plate, broken, folded out with
inner seam). The sink material has been tried to bend, 90 degrees,
but it will not continue.
J4( High Copper): It is the higher end of the J series. It is
suitable for small angle types of deep drawing products. Most of
the products that require deep salt picking and salt spray test
will choose it. For example, sinks, kitchen utensils, bathroom
products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make
equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the
inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric
corrosion resistance, and high-temperature strength due to the
addition of Mo, which can be used under harsh conditions; excellent
work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid,
fertilizer and other production equipment; photographs, food
industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable
ferritic stainless steel available. Type 430 is known for good
corrosion, heat, oxidation resistance, and its decorative nature.It
is important to note that when well polished or buffed its
corrosion resistance increases. All welding must occur at higher
temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different
commercial and industrial applications including:Furnace combustion
chambers,Automotive trim and molding,Gutters and downspouts,Nitric
acid plant equipment,Oil and Gas refinery equipment,Restaurant
equipment,Dishwasher linings,Element supports and fasteners.etc.
Item | Stainless steel bar/rod |
Standard | ASTM A479,ASTM A276,ASTM A484, ASTM A582,
ASME SA276, ASME SA484, GB/T1220, GB4226, etc. |
Material | 301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202
321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200,
S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc. |
Specifications | Round bar:Diameter 0.1~500mmAngle bar:Size
0.5mm*4mm*4mm~20mm*400mm*400mm
Flat bar:Thickness 0.3~200mm Width 1~2500mm
Square bar:Size 1mm*1mm~800mm*800mm |
Length | 2m, 5.8m, 6m, or as required. |
Surface | Black, peeled, polishing, bright, sand blast, hair line, etc. |
Price Term | Ex-work, FOB, CFR, CIF, etc. |
Package | Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CB |
| Characteristics & Application |
| Hot-rolled surface,annealed and pickled,can be used as cold-rolling
material,industial tanks and chem i cal devices. |
| Cold-rolled, an nealed and pick led with out skinpassing the dull
prod ucts can be used as auto mo bile parts, build ing materrials
and pipings. |
| The surface brightness and flatness of NO.2B is better than NO.2D.
Then through a special surfacetreament to improve its mechamical
properties, N02B could nearly satisfy com pre hen sive uses. |
| Polished with abra sive belt of grit #100#120,have bet ter bright
ness with dis con tin u ous coarse stria, used as in ner and ex ter
nal or na ments for building, elec tri cal ap pli anc es and
kitchen uten sils etc. |
| Polished with abrasive belt of grit #150#180, have better
brightness with discontinuous coarse stria, but thinner than NO.3,
are used as bathtud buildinginner and external ornaments electrical
appliances, kitchen utensils and food processing equipment etc. |
| Polished with abrasive belt of grit #150-320 on the No.4 finish and
has continuous streaks, mainly used as building ornaments,
elevators, door of building, frontal plate etc. |
| Cold rolled, bright an nealed and skin passed, the prod uct has ex
cel lent bright ness and good re flex iv i ty like mirror, used for
lectrical appliances, mirror, kitch en apparatus, or na ment ma te
ri als etc. |
Domestic | cutlery, sinks, saucepans, washing machine drums, microwave oven
liners, razor blades |
Transport | exhaust systems, car trim/grilles, road tankers, ship containers,
ships chemical tankers, refuse vehicles |
Oil and Gas | platform accommodation, cable trays, subsea pipelines |
Medical | Surgical instruments, surgical implants, MRI scanners |
Food and Drink | Catering equipment, brewing, distilling, food processing |
Water | Water and sewage treatment, water tubing, hot water tanks |
Chemical/Pharmaceutical | pressure vessels, process piping |
Architectural/Civil Engineering | cladding, handrails, door and window fittings, street furniture,
structural sections |
reinforcement bar,lighting columns, lintels, masonry supports |
Available Types of 304L SS Round Bars |
Stainless Steel 304L Forged Rod | SUS 304L Hex Bars | SS 304L
Forged Bar | 304L SS Cold Drawn Round Bars | UNS S30400 Polished
Round Bars | SS 1.4301 Flat Bar | 304L Stainless Steel Round Bar |
304L Stainless Steel Hexagon Bar | SS 304L Black Bar | 304L
Stainless Steel Rectangular Bars | 304 Stainless Steel Rods | SS
304L Cold Drawer Round Bar | Stainless Steel 304L Industrial Round
Bar | ASTM A276 SS 304L Round Bar | AISI 304L Steel Round Bar |
ASME SA276 Stainless Steel 304L Round Bar.
stainless steel 304l rectangle bars, ss 304l round bar
manufacturer, astm a276 304l ss square bar, mechanical properties
304l stainless steel round bars, stainless steel 304l hex bar,
stainless steel 304l round rod chart, 304l ss round bars supplier
in China , 304l stainless steel round bar exporter in mumbai india,
304l stainless steel round bar, stainless steel 304l round bars
sizes, stainless steel 304l round bars dealer, round bar metal
gauge size chart, high quality ss 304l round bars stockholder in
India, stainless steel 304l round bar cheap price, ss 304l round
bar cold drawn, ss 304l forged bars, ss 304l round bar supplier,
304l stainless steel rods, asme sa276 stainless steel 304l billet,
ss 304l round bar, ss 304l round bar cheap price, ss 304l round bar
stockist, ss 304l cold drawn round bar price list, 304l ss round
bars chemical composition, ss 304l hex bars, 304l 26 gauge
stainless steel round bar, ss 304l round bar dealer in mumbai, 304l
steel round bar exporter, ss 304l round rods trader, 304l ss round
bar specification, ss 304l round bar stockist in China, ss 304l
round bar stockholder
